Blog Técnico | PomDepot

Material GuidesJune 9, 2026

ESD Plastics: Industrial Selection Guide

Guide to selecting ESD plastics for industrial applications: POM ESD, PEEK ESD, PEI ESD, PA ESD, and ABS ESD by temperature, wear, precision, and static control.

Read article

Industrial ApplicationsJune 6, 2026

Fixtures and Test Nests: Industrial Plastics for Electronics

How to choose industrial plastics for fixtures and test nests in electronics: POM, POM ESD, PEEK, PEI, PA, and ABS by precision, wear, ESD, and temperature.

Read article

Material GuidesJune 3, 2026

PPS vs PEEK: High Temperature and Chemical Resistance

Technical comparison of PPS and PEEK for high-temperature industrial applications, chemical resistance, dimensional stability, and machined parts.

Read article

Material GuidesJune 1, 2026

PTFE vs UHMWPE: Friction, Wear, and Chemicals

Comparison of PTFE and UHMWPE for low friction, wear, abrasion, impact, and chemical resistance in industrial applications.

Read article

Advanced MaterialsMay 16, 2026

UHMWPE: Properties & Applications of Ultra-High Molecular Weight Polyethylene

Discover UHMWPE properties, the ultra-high molecular weight polyethylene. Technical guide with applications in mining, food, and industrial manufacturing.

Read article

Technical GuideMay 15, 2026

Polycarbonate (PC): Properties & Industrial Applications

Polycarbonate (PC) technical guide: properties, comparison vs acrylic and glass, and industrial applications in guards, automotive, and construction.

Read article

ProductsMay 14, 2026

Aluminum Profile Accessories: Complete T-Slot Extrusion Guide

Complete guide to aluminum T-Slot profile accessories: types, selection, assembly, and industrial applications.

Read article

Industrial ApplicationsMay 13, 2026

FDA Food-Grade Plastics for Pharmaceutical & Food Industry

Guide to FDA-approved plastics for food contact: UHMWPE, POM, Nylon, PEEK, and PTFE.

Read article

Material GuidesMay 12, 2026

Engineering Plastics Comparison Table: Material Selection Guide

Engineering plastics comparison: POM, Nylon, UHMWPE, PEEK, Polycarbonate, and PTFE.

Read article

Advanced MaterialsApril 29, 2026

Fiberglass Reinforced Nylon: Key Properties of this High-Strength Plastic

Discover the properties of fiberglass reinforced nylon, a key engineering plastic. We explore how glass fiber enhances nylon and the applications of glass-filled variants and glass-filled nylon.

Read article

Advanced MaterialsApril 26, 2026

PEEK vs. PEI: The Most Resistant Filament for Heat-Resistant and High-Temperature 3D Printing

Discover the ultimate comparison between PEEK and PEI. Explore these high-strength 3D printing materials and their use in high-temperature environments, ideal for heat-resistant 3D printing, aerospace, and components that outperform metal, offering a heat-resistant solution for the most demanding 3D printing.

Read article

Technical GuideApril 22, 2026

CNC Machining of POM-C: A Complete Guide to CNC POM and High-Precision POM Machining

Discover the complete guide to CNC machining of POM-C. Learn the advantages of CNC machining for high-precision POM parts and how PomDepot optimizes its POM machining process.

Read article

Advanced MaterialsApril 17, 2026

Metal to Engineering Plastic Substitution: How to Replace Metal Parts with Technical Plastics and Thermoplastics?

Discover the advantages of metal to engineering plastic substitution. Learn how to replace metal components and optimize your designs with high-performance plastic materials, reducing costs and improving functionality.

Read article

Technical GuideApril 11, 2026

POM-C vs. POM-H: Advantages of Polyoxymethylene Copolymer over Homopolymer – POM Acetal Resin Guide

Discover the advantages of POM-C, an acetal copolymer, over the homopolymer. We analyze its superior rigidity, dimensional stability, mechanical strength, and excellent wear resistance as a key low-friction thermoplastic.

Read article

Advanced MaterialsApril 4, 2026

PEEK in Aerospace Manufacturing: Injection Molding to Shape the Future Towards 2025

Explore the future of PEEK in the aerospace industry, where injection molding of this lightweight, high-performance material is key. Discover how PEEK molding and injection are transforming aerospace manufacturing.

Read article

Technical GuideMarch 28, 2026

Complete Guide to Plastic Machining: Optimizing CNC Machining of POM and Engineering Plastics

Discover our complete guide to plastic machining, focusing on the CNC machining process for POM and other engineering plastics. Achieve high precision and explore the advantages of CNC plastic machining with PomDepot, your partner in manufacturing high-quality components.

Read article

Technical GuideMarch 25, 2026

PEEK Plastic in Medical Applications: The Definitive Guide to PEEK Properties and Machining

Discover why PEEK plastic is indispensable in demanding medical applications. This guide explores PEEK's properties and the precision of CNC machining for critical components.

Read article

Advanced MaterialsMarch 21, 2026

POM vs Nylon: Key Differences in Gears, Properties, and Applications | PomDepot

Discover the key differences between POM and nylon in manufacturing, analyzing their mechanical properties, chemical resistance, dimensional stability, and applications. This essential guide will help you select the right material for your engineering projects.

Read article

Advanced MaterialsMarch 18, 2026

Advantages of PEEK: The Definitive Material for High-Performance Industrial Applications

Discover why PEEK is the preferred material in the most demanding industrial applications. Its superior strength and durability position it as an indispensable high-performance polymer.

Read article

Advanced MaterialsMarch 11, 2026

Nylon 6 vs Nylon 66: PA6 vs PA66 – How to Choose the Best Engineering Plastic

Discover the key differences between nylon 6 and nylon 66 (PA6 vs PA66). Learn how to choose the ideal engineering plastic for your industrial applications, ensuring durability and optimal performance.

Read article

Advanced MaterialsMarch 4, 2026

POM: Chemical Resistance of Polyoxymethylene (Acetal) Engineering Plastic in Industrial Environments – POM Material

Discover the exceptional chemical resistance of POM (acetal or polyoxymethylene), a vital engineering plastic for demanding industrial environments. Explore how this advanced material maintains its integrity and performance.

Read article

Industrial QualitySeptember 11, 2025

Quality Control in Plastics: Problems and Solutions

Explore the importance of quality control in plastics, its common challenges, and effective solutions to improve industrial processes.

Read article

Technical GuidesSeptember 1, 2025

Coefficient of Friction vs. Temperature in Plastics

The coefficient of friction of plastics varies with temperature, affecting their performance in critical industrial applications.

Read article

Material GuidesAugust 21, 2025

Key Regulations in Plastics: 2025 Guide

2025 plastics regulations are transforming the industry, focusing on sustainability, traceability, and manufacturing safety.

Read article

Industrial QualityAugust 11, 2025

10 Benefits of SPC in Plastics Manufacturing

Statistical Process Control (SPC) transforms plastics manufacturing, improving quality, productivity, and reducing costs.

Read article

Industrial ApplicationsAugust 1, 2025

Plastics in Electrical Systems: Uses and Benefits

Plastics are key in electrical systems, offering insulation, durability, and sustainability, transforming the industry in Mexico.

Read article

Technical GuidesJuly 21, 2025

10 Frequently Asked Questions About Engineering Plastics

Explore the growth and applications of engineering plastics in Mexico, highlighting their advantages and sustainability challenges.

Read article

Material GuidesJuly 11, 2025

ABS vs PA: Industrial Use Comparison

Compare ABS and PA for industrial applications, analyzing their properties, costs, and suitability for different sectors.

Read article

Technical GuidesJuly 1, 2025

Solutions to Common Problems with Industrial PET

Industrial PET processing faces challenges like moisture and deformation, but parameter and design adjustments can improve quality.

Read article

Material GuidesJune 21, 2025

Ultimate Guide: High Thermal Resistance Plastics

High thermal resistance plastics like PEEK, PPS, and PTFE are crucial in the automotive, aerospace, and medical industries.

Read article

Technical GuidesJune 11, 2025

6 Advantages of Antistatic PC in Electronic Equipment

Antistatic polycarbonate provides vital protection against electrostatic discharge and improves durability and safety in electronic equipment.

Read article

Industrial QualityJune 1, 2025

Checklist: Quality Control in Engineering Plastics

Quality control in engineering plastics ensures reliable products and reduces operational costs through material selection and rigorous testing.

Read article

Material GuidesMay 21, 2025

How to Select the Right Industrial Plastic

Learn how to select the right industrial plastic to maximize durability and meet regulatory requirements in your projects.

Read article

Material GuidesApril 11, 2025

Comparative Guide: PEEK vs PTFE in Medical Applications

Compare PEEK and PTFE in medical applications, exploring their properties, uses, and recommendations for choosing the right material.

Read article

Industrial ApplicationsApril 7, 2025

5 Key Applications of POM in the Automotive Industry

Polyoxymethylene (POM) is vital in the automotive industry, excelling in components due to its strength and lightness.

Read article

Technical GuidesApril 7, 2025

8 Essential Properties of PPS in Industrial Manufacturing

PPS is a key material in industrial manufacturing, standing out for its thermal, chemical, and mechanical resistance in demanding applications.

Read article

Industrial ApplicationsDecember 2, 2024

The Importance of POM (Polyoxymethylene) Engineering Plastic in Costa Rica

Polyoxymethylene (POM), also known as acetal, has gained a key role in Costa Rican industry.

Read article

ProductsOctober 29, 2024

POM ESD: The Ultimate Solution for Electrostatic Protection

Discover how POM ESD protects against electrostatic discharge in the electronics and semiconductor industry.

Read article

Industrial ApplicationsSeptember 12, 2024

The Influence of Industry in Ciudad Juárez and the Role of POM Plastic on the Border

Ciudad Juárez has established itself as a key industrial hub, where POM plastic plays a leading role.

Read article

ProductsSeptember 12, 2024

PTFE: Polytetrafluoroethylene and Its Countless Applications

PTFE is a revolutionary polymer that has transformed multiple industries thanks to its unique chemical and thermal properties.

Read article

ProductsAugust 25, 2024

Polyacetal (POM): Acetal Resin and Engineering Thermoplastic

Everything you need to know about Polyoxymethylene (POM): properties, applications, and advantages of this engineering thermoplastic.

Read article

Industrial ApplicationsAugust 24, 2024

Polymers in Modern Manufacturing: Analysis and Applications

The impact of Polyoxymethylene (POM) in modern manufacturing: a versatile polymer for high-performance industrial applications.

Read article

Industrial ApplicationsAugust 24, 2024

POM: The Engineering Plastic Revolutionizing Precision Manufacturing

Discover how POM is transforming precision manufacturing with its exceptional mechanical properties.

Read article

Industrial ApplicationsJuly 23, 2024

The Crucial Role of POM Plastic in Ciudad Juárez's Manufacturing Industry

Ciudad Juárez, Chihuahua: the nerve center of the POM plastic industry and its impact on border manufacturing.

Read article

NewsJanuary 7, 2024

Kicking Off 2024

Happy New Year! At POM Depot, we start 2024 with innovations and a renewed commitment to the engineering plastics industry.

Read article

Industrial ApplicationsDecember 21, 2023

The Infinite Power of POM: Exploring Its Innovative Applications in Today's Industry

Today's industry demands versatile, high-performance materials. POM leads this revolution.

Read article

Industrial ApplicationsDecember 16, 2023

Mexico: Second Largest Electrical Harness Producer Worldwide

Mexico positions itself as one of the leading producers of electrical harnesses, driving the global automotive industry.

Read article

Industrial ApplicationsDecember 13, 2023

Transformation in the Automotive Wiring Harness Industry

Mexico is one of the world's leading suppliers of electrical harnesses. The impact of electric vehicles is transforming the industry.

Read article

ProductsDecember 11, 2023

Forms and Trade Names of Acetal or Polyacetal Plastic (Delrin)

Learn the different forms and names of POM: Delrin, Kocetal, Ultraform, and more. A complete guide to trade names.

Read article

Industrial ApplicationsOctober 30, 2023

The Crucial Role of Plastic in the Automotive Industry: Harnesses

In the automotive industry, plastic plays a fundamental role in manufacturing harnesses and essential components.

Read article

ProductsOctober 25, 2023

Polyoxymethylene (POM): Polyacetal Resin, Engineering Thermoplastic

Polyoxymethylene (POM) is an engineering thermoplastic widely used for its strength and industrial versatility.

Read article

IndustryOctober 14, 2023

Macau and Its Economic Development

Did you know that Macau is considered one of the most prosperous regions? We explore its economic development and connection to industry.

Read article

ProductsOctober 9, 2023

Properties and Applications of POM (Polyoxymethylene): The #1 Polyacetal in Versatility

POM (polyoxymethylene) is an engineering thermoplastic with excellent mechanical, chemical, and processing properties.

Read article

ProductsAugust 28, 2023

POM Plastic: Strength, Durability, and Versatility for Industrial Operators

POM, also known as polyoxymethylene, is an engineering plastic that stands out for its strength and durability.

Read article

ProductsAugust 19, 2023

High-Resistance POM Plastic

We explore the characteristics and advantages of high-resistance POM plastic for demanding industrial applications.

Read article

Industrial ApplicationsJune 28, 2023

Polyoxymethylene (POM): The Importance of This Plastic in Modern Industry

In today's industry, plastics play an essential role. POM stands out for its importance in modern manufacturing.

Read article

IndustryMarch 28, 2023

A Look at the History and Evolution of the Plastics Industry

From its origins to the present day, we explore the fascinating history and evolution of the plastics industry.

Read article

Knowledge Center

ESD Plastics: Industrial Selection Guide

Fixtures and Test Nests: Industrial Plastics for Electronics

PPS vs PEEK: High Temperature and Chemical Resistance

PTFE vs UHMWPE: Friction, Wear, and Chemicals

UHMWPE: Properties & Applications of Ultra-High Molecular Weight Polyethylene

Polycarbonate (PC): Properties & Industrial Applications

Aluminum Profile Accessories: Complete T-Slot Extrusion Guide

FDA Food-Grade Plastics for Pharmaceutical & Food Industry

Engineering Plastics Comparison Table: Material Selection Guide

Fiberglass Reinforced Nylon: Key Properties of this High-Strength Plastic

PEEK vs. PEI: The Most Resistant Filament for Heat-Resistant and High-Temperature 3D Printing

CNC Machining of POM-C: A Complete Guide to CNC POM and High-Precision POM Machining

Metal to Engineering Plastic Substitution: How to Replace Metal Parts with Technical Plastics and Thermoplastics?

POM-C vs. POM-H: Advantages of Polyoxymethylene Copolymer over Homopolymer – POM Acetal Resin Guide

PEEK in Aerospace Manufacturing: Injection Molding to Shape the Future Towards 2025

Complete Guide to Plastic Machining: Optimizing CNC Machining of POM and Engineering Plastics

PEEK Plastic in Medical Applications: The Definitive Guide to PEEK Properties and Machining

POM vs Nylon: Key Differences in Gears, Properties, and Applications | PomDepot

Advantages of PEEK: The Definitive Material for High-Performance Industrial Applications

Nylon 6 vs Nylon 66: PA6 vs PA66 – How to Choose the Best Engineering Plastic

POM: Chemical Resistance of Polyoxymethylene (Acetal) Engineering Plastic in Industrial Environments – POM Material

Quality Control in Plastics: Problems and Solutions

Coefficient of Friction vs. Temperature in Plastics

Key Regulations in Plastics: 2025 Guide

10 Benefits of SPC in Plastics Manufacturing

Plastics in Electrical Systems: Uses and Benefits

10 Frequently Asked Questions About Engineering Plastics

ABS vs PA: Industrial Use Comparison

Solutions to Common Problems with Industrial PET

Ultimate Guide: High Thermal Resistance Plastics

6 Advantages of Antistatic PC in Electronic Equipment

Checklist: Quality Control in Engineering Plastics

How to Select the Right Industrial Plastic

Comparative Guide: PEEK vs PTFE in Medical Applications

5 Key Applications of POM in the Automotive Industry

8 Essential Properties of PPS in Industrial Manufacturing

The Importance of POM (Polyoxymethylene) Engineering Plastic in Costa Rica

POM ESD: The Ultimate Solution for Electrostatic Protection

The Influence of Industry in Ciudad Juárez and the Role of POM Plastic on the Border

PTFE: Polytetrafluoroethylene and Its Countless Applications

Polyacetal (POM): Acetal Resin and Engineering Thermoplastic

Polymers in Modern Manufacturing: Analysis and Applications

POM: The Engineering Plastic Revolutionizing Precision Manufacturing

The Crucial Role of POM Plastic in Ciudad Juárez's Manufacturing Industry

Kicking Off 2024

The Infinite Power of POM: Exploring Its Innovative Applications in Today's Industry

Mexico: Second Largest Electrical Harness Producer Worldwide

Transformation in the Automotive Wiring Harness Industry

Forms and Trade Names of Acetal or Polyacetal Plastic (Delrin)

The Crucial Role of Plastic in the Automotive Industry: Harnesses

Polyoxymethylene (POM): Polyacetal Resin, Engineering Thermoplastic

Macau and Its Economic Development

Properties and Applications of POM (Polyoxymethylene): The #1 Polyacetal in Versatility

POM Plastic: Strength, Durability, and Versatility for Industrial Operators

High-Resistance POM Plastic

Polyoxymethylene (POM): The Importance of This Plastic in Modern Industry

A Look at the History and Evolution of the Plastics Industry